HVAC and Automotive Refrigerant Supplier in Dallas-Fort Worth.
From Dallas high-rises to Fort Worth's growing suburbs, DFW's long, hot summers keep HVAC crews and auto shops busy from April through October. We keep both sides of the Metroplex stocked with EPA 608 compliant refrigerant.
EPA Section 608 Compliant
Every order shipped into the Metroplex includes EPA Section 608 and AHRI 700 documentation, ready for contractor audits on either side of DFW.
Fast Nationwide Shipping
Ships to Dallas and Fort Worth within one business day, with routes that split naturally along I-30 and I-35W to cover both cities without added delay.
Bulk & Wholesale Pricing
Wholesale pricing scales for DFW distributors and multi-shop operators who need consistent supply across a sprawling metro.
Secure Online Ordering
DFW customers can order online, by phone, or set up an account for repeat cylinder reorders across multiple job sites.
Refrigerants and Accessories in Dallas-Fort Worth
DFW's sheer size means contractors on the Fort Worth side often face longer supply runs than those closer to downtown Dallas, and new-construction HVAC demand keeps stretching supply thin across the whole Metroplex.
HVAC Refrigerants
Residential and commercial system refrigerants.
Automotive Refrigerants
Mobile AC refrigerants for cars, trucks, and fleets.
Accessories and Tools
Can taps, gauges, and service tools.
An EPA 608 Distributor Built for Contractors
We are an EPA Section 608 licensed refrigerant distributor carrying Honeywell refrigerants alongside a full range of service tools and accessories for HVAC and automotive technicians nationwide. We split delivery routes between Dallas and Fort Worth so neither side of the Metroplex waits longer than the other for a restock.
Why Choose Us in Dallas-Fort Worth
DFW Route Knowledge
Our routing accounts for I-30, I-35W, and the 635 loop, so deliveries reach both Dallas and Fort Worth on predictable schedules.
Verified Chain-of-Custody
Cylinders shipped into the Metroplex carry full tracking documentation from warehouse to job site for easy EPA compliance checks.
Flexible Order Minimums
Order sizes flex for small residential HVAC crews and larger commercial contractors working across both cities.
Regional Logistics
Coverage extends from Plano and Frisco through Fort Worth and Arlington from a single DFW-area distribution route.
Who We Serve Across Dallas-Fort Worth
HVAC Contractors and Commercial Teams
HVAC contractors handling new-construction installs in fast-growing DFW suburbs depend on steady R-410A and R-454B supply to keep pace with home builders.
Wholesale Distributors
Wholesale distributors serving both Dallas and Fort Worth use our case pricing to keep two-city inventory without doubling their carrying costs.
Automotive and MVAC Professionals
Commuter fleet operators covering the long Metroplex drive times rely on us for R-1234yf and R-134A to keep vehicle AC systems reliable.
HVAC Refrigerants in Dallas-Fort Worth
New-construction growth on both sides of the Metroplex keeps residential HVAC install demand high, while established Dallas commercial buildings drive steady replacement refrigerant orders.
Buy R-438A Refrigerant Cylinder in USA – DOT & EPA Compliant
In stock
R-134A 30lb Refrigerants HVAC 1/4 ACME
In stock
R-407A 25lb Refrigerant – Low-Temp Commercial HVAC
In stock
R-407C Refrigerant 25lb Factory Sealed
In stock
R-410A 25lb Refrigerant – Virgin Sealed HVAC Grade
In stock
R-410A Refrigerant 25lb Honeywell Virgin Sealed
In stock
R-448A 25lb Honeywell Refrigerant – Made in USA
In stock
Automotive Refrigerants in Dallas-Fort Worth
DFW's long commuter distances put real wear on vehicle AC systems, and our automotive refrigerant stock keeps fleet and independent shops running.
1234yf Refrigerant for MVAC use in a 8-Ounce Self-Sealing Container HONEYWELL
In stock
8oz R1234YF Refrigerant (4 8oz Cans) HD Brass Honey Well Genuine
In stock
8oz R1234YF Refrigerant 2 Cases (8 Cans) Honeywell Genuine
In stock
R-1234YF 10LB Refrigerants Cylinder Honeywell Made in USA
In stock
R-1234yf 25lb Honeywell – MADE IN USA Refrigerants Center
In stock
R-134A 30lb Refrigerants 30lb Automotive 1/2 ACME Made in USA
In stock
R134A 20x30lb Cylinders Automotive Refrigerant FREE FREIGHT!
In stock
R134A 40x30lb Cylinders Automotive Refrigerant FREE FREIGHT!
In stock
Accessories and Tools in Dallas-Fort Worth
DIY installers and full-time HVAC techs across the Metroplex both find the can taps, gauges, and accessories they need in one place.
8oz R1234YF 3 Cans & HD Brass Can Tap with Gauge, Honeywell
In stock
R-32 Refrigerant 20lb Cylinder – Low GWP Replacement for R-410A
In stock
R1234YF Refrigerant (4 Cans 8oz) & HD Brass Can Tap with Gauge – HoneyWell
In stock
Which Refrigerant Do You Need?
Start with what you are servicing. A car, truck, or fleet vehicle always uses automotive refrigerant. A home or commercial AC system always uses HVAC refrigerant. The two are never interchangeable, and using the wrong one can damage the system.
- Servicing a vehicle built 2021 or later: use R-1234yf. It is the current automotive standard and required on most new vehicle AC systems.
- Servicing an older vehicle (pre-2021): use R-134A. Most cars and light trucks built before the R-1234yf transition still run on this refrigerant.
- Replacing refrigerant in a home or light commercial AC system: use R-410A. It remains the most common choice for existing residential systems.
- Servicing an older AC unit installed before 2010: use R-22, though supply is limited and a system upgrade is often the better long-term fix.
- Installing or replacing a new residential AC system: use R-454B. It is the current lower-GWP replacement for R-410A in new equipment.
- Working on commercial refrigeration equipment: use R-404A, R-407A, or R-448A, depending on what the manufacturer specifies for that unit.
- Not sure which one your system takes: check the manufacturer’s nameplate on the unit itself. It always lists the exact refrigerant type required.
Automotive vs. HVAC Refrigerant
| Category | Automotive Refrigerant | HVAC Refrigerant |
|---|---|---|
| Common Types | R-1234yf, R-134A | R-410A, R-22, R-407C, R-454B |
| System Use | Vehicle AC systems | Residential and commercial AC/refrigeration |
| Purity Standard | SAE J2099 | AHRI 700 |
| Typical Container | Small cans, cylinders | Cylinders, drums |
R-410A vs. R-32 vs. R-454B
| Refrigerant | GWP | Common Use | Flammability Class |
|---|---|---|---|
| R-410A | 2088 | Legacy residential/commercial AC | A1 (non-flammable) |
| R-32 | 675 | New AC systems, lower GWP | A2L (mildly flammable) |
| R-454B | 466 | Next-gen residential AC replacement | A2L (mildly flammable) |
Trusted By Auto Shops and Contractors Across Dallas-Fort Worth
"Needed R404A 24lb for a commercial refrigeration job across our Dallas-Fort Worth accounts and SmartRefrigerants had it out the door same day. No minimum order made it easy to get exactly what we needed."
"Made the switch to R-448A for our Fort Worth supermarket refrigeration accounts and haven't looked back. Consistent cylinder quality and every order has arrived fully labeled and ready to use."
"Switched our Dallas commercial accounts over to R-407A and the 25lb cylinders have performed consistently across every install. Ordering online has cut our supply run time in half."
"As a parts distributor covering the Dallas-Fort Worth metroplex, the R134A 40x30lb pallet option lets us restock our customers without constant reordering. Consistent quality and fair wholesale pricing."
"Perfect size for our Fort Worth shop's day-to-day recharges. The R-1234YF 10lb cylinder is easy to handle between bays and we're not stuck storing an oversized tank we rarely finish."
"The 4-can pack of 8oz R1234YF is exactly right for our smaller Dallas shop. HD brass can tap included and we didn't need to buy anything extra to get the first recharge done."
"Great all-in-one option for our Dallas-Fort Worth fleet maintenance team. The 3 cans with gauge covered a full round of vehicle recharges and the gauge held its accuracy through the whole job."
"We equip every technician at our Fort Worth dealership with the 1234yf Gauge. Consistent accuracy across every unit and it has never given us a bad reading on a busy service day."
"We've moved several Dallas office-tower chiller accounts to R-513A and the 30lb cylinders have been consistent every time. Smooth ordering process and deliveries always show up on schedule."
Buying in Bulk in Dallas-Fort Worth?
New-construction HVAC contractors, wholesale distributors, and multi-location shops spanning both Dallas and Fort Worth use our bulk program for consistent Metroplex-wide pricing.
Frequently Asked Questions
Yes. Every refrigerant we sell meets EPA Section 608 and AHRI 700 purity standards, and full documentation ships with every order.
Most orders to Dallas-Fort Worth ship within one business day, with delivery arriving within one to two business days depending on your exact location.
Yes. HVAC distributors, contractors, and multi-location shops in Dallas-Fort Worth can qualify for wholesale pricing tiers based on order volume.
Same-day delivery is available within core Dallas and Fort Worth zip codes on orders placed before the daily cutoff, with next-day coverage across the rest of the Metroplex.
Yes. We stock high volumes of R-410A and R-454B specifically to support the new-construction pace in growing DFW suburbs like Frisco, McKinney, and Mansfield.